Request a Quote
Superior

Testing that Reaches the World

Materials & Laboratory Analysis

Analytical ChemistryTesting Services

Clark Testing provides analytical chemistry testing for metals, alloys, industrial materials, process solutions, petroleum products, and manufacturing by-products. Our laboratory combines instrumental analysis and wet chemistry to help customers understand material composition, verify specifications, and investigate quality concerns.

Testing methods are selected according to the material and the information required. Work may follow applicable ASTM, API, EPA, military, and other approved methods, as well as customer-supplied procedures and in-house method development. Applicable accreditation depends on the specific method and scope.


Laboratory Capabilities

Analytical Chemistry Capabilities

Clark Testing analyzes ferrous and nonferrous metals, alloys, ceramics, refractories, ores, fluxes, process solutions, and petroleum-based materials. Instrument selection and sample preparation depend on the material matrix, analytical objectives, and reporting requirements.

Instrumental Analysis

Common Sample Materials

  • Steel, ferrous and nonferrous metals, and metal alloys
  • Steel additives, slag, scrap, and baghouse dust
  • Ores, industrial minerals, ceramics, refractories, and fluxes
  • Coal, coke, slurries, and industrial by-products
  • Process solutions, coatings, emulsions, and other liquids
  • Lubricants, petroleum products, and related materials

Complementary characterization: Chemical composition can be paired with Particle Characterization for particle size, density, porosimetry, and surface area determinations, as appropriate.

Methods & Instrumentation

Elemental and Chemical Analysis Methods

Optical Emission Spectroscopy (OES)

OES is used to determine elemental composition in solid ferrous metals, including steel chemistry verification and failure investigations. A prepared and polished specimen is sparked for analysis. Methods referenced in our existing testing program include ASTM E1086 and ASTM E415.


Typical elements:

Al, Cr, Cu, Mn, Mo, Ni, Nb, P, Si, Ti, V, and Fe balance.

Inductively Coupled Plasma Spectroscopy (ICP)

Solid samples may be crushed, cut, or milled and prepared through acid digestion or borate fusion before analysis. Liquids may be digested or analyzed as received, depending on the sample. ICP provides individual elemental results, reported as elements or elemental oxides as appropriate.


Typical elements:

Al, Ag, As, Ba, Be, Cd, Ca, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sb, Si, Sn, Ti, V, W, and Zn.

Wavelength Dispersive X-ray Fluorescence (WD-XRF)

WD-XRF supports analysis of ceramics, refractories, ores, fluxes, and petroleum products. Mineral and ceramic samples may be crushed, treated for loss on ignition, and fused for oxide determinations. Petroleum products may be analyzed as received for wear metals or additive elements. Referenced methods include ASTM D6443 and ASTM D2622.

Typical oxide results: SiO2, Al2O3, CaO, MgO, P2O5, K2O, Na2O, Fe2O3, MnO, TiO2, Cr2O3, V2O4, ZrO2, CaF2, and F.

Typical petroleum results: S, Cl, P, Ca, Zn, Na, Mg, and Si.

X-ray Diffraction (XRD)

XRD identifies crystalline phases in solid materials and can provide qualitative or semi-quantitative information about compounds present. Crystalline silica testing is also performed using a method based on NIOSH 7500, with separate determinations for alpha-quartz, cristobalite, and tridymite.


Crystalline silica:

The existing page identifies a reporting limit as low as 0.1%. Confirm the applicable reporting limit for each sample and method before quoting.

Ion Chromatography (IC)

IC measures anions in process solutions, stripping solutions, coatings, emulsions, and other liquids. Samples may be tested as received or prepared through leaching or combustion-bomb procedures. For organic-containing materials, sample preparation may reference ASTM D808.


Typical anions:

Fluoride, chloride, nitrite, bromide, nitrate, phosphate, sulfite, and sulfate.

Combustion Elemental Analysis

Crushed, cut, or milled solid materials can be analyzed by combustion or induction-furnace techniques for carbon, sulfur, oxygen, or nitrogen. Carbon and sulfur are commonly measured in raw materials and metals; oxygen and nitrogen testing is used for metals, with ASTM E1019 referenced in the existing program.

Chemiluminescence and UV-Fluorescence

These techniques support nitrogen and sulfur determinations in petroleum-related materials. Methods identified in the existing program include ASTM D5762 and ASTM D5453.

Additional Testing

Wet Chemistry and Specialty Analyses

Wet Chemistry

Bench-top analysis includes titrations, distillations, and chemical reactions used to measure specific properties or constituents.

  • Free and total sulfur (MIL-G-155A referenced)
  • Pyritic sulfur
  • Iron oxidation states and metallic iron, FeO, and total iron determinations
  • Polycyclic aromatic determinations using IP 346
  • Oil film weight on sheet steel, with optional metal fines and soaps
  • Acidity, alkalinity, pH, solids, and moisture
  • Total suspended solids, EPA 160.2 / ASTM D5907
  • Volatile content, modified EPA Method 24

Specialty Testing

  • Macroetch: Examination of internal quality, flow lines, segregation, inclusions, and imperfections in cast or wrought steel, referencing ASTM E340
  • Sulfur print: Visualization of sulfide distribution and solidification patterns in steel, referencing ASTM E1180
  • Corrosion: Testing according to applicable API guidelines
  • Failure analysis: Job-specific visual examination, metallography, microhardness, and SEM/EDS fractography, with documented findings and conclusions

Referenced Methods

Testing Standards and Methods

Standards listed below are referenced in Clark Testing's existing Analytical Chemistry page. Method applicability, current revisions, accreditation status, and sample requirements should be confirmed when defining a test program.

ASTM E415 / ASTM E1086 OES steel chemistry
ASTM D6443 / ASTM D2622 Petroleum-related XRF testing
NIOSH 7500 Crystalline silica by XRD
ASTM D808 Sample preparation for halogen analysis
ASTM E1019 Oxygen and nitrogen in steel and related alloys
ASTM D5762 / ASTM D5453 Nitrogen and sulfur determinations
ASTM E340 / ASTM E1180 Macroetch and sulfur print
ASTM D5907 / EPA 160.2 Total suspended solids
EPA Method 24 / IP 346 Volatile content and polycyclic aromatic determinations
MIL-G-155A Referenced sulfur testing procedure

Applications

Industries and Related Laboratory Services

Analytical chemistry supports quality assurance, material verification, product development, process monitoring, and failure investigations across primary metals, heavy industry, energy, electronics, agriculture, medical and pharmaceutical materials, and food and beverage applications. Specific examples include batteries, ceramics, industrial minerals, and protective packaging materials.

For broader investigations, chemical analysis can be combined with
Particle Characterization
and other applicable Clark Testing laboratory services, including corrosion, lubricant, tensile, and hardness testing.

Testing Capabilities at a Glance

Analytical Chemistry Methods, Materials, and Standards

Clark Testing selects analytical methods based on the sample matrix, elements or compounds of interest, applicable specifications, and reporting needs. The following examples connect common analytical techniques with materials and referenced methods.

Testing method Typical applications Referenced standards or methods
Optical Emission Spectroscopy (OES) Elemental composition of ferrous metals and steel alloys ASTM E415, ASTM E1086
ICP Spectroscopy Elemental analysis of prepared solids and liquids Method selected according to material and analytes
WD-XRF Oxide composition of ceramics, refractories, ores and fluxes; selected petroleum analyses ASTM D6443, ASTM D2622 for applicable petroleum testing
X-ray Diffraction (XRD) Crystalline phase identification; crystalline silica determination NIOSH 7500 for applicable crystalline silica analysis
Ion Chromatography (IC) Anions in process solutions, coatings, emulsions and other liquids Method selected according to sample and target ions
Wet Chemistry Acidity, alkalinity, solids, moisture and selected chemical constituents ASTM D5907, EPA 160.2 and other applicable methods

These are examples, not a complete accreditation scope or a guarantee that every method applies to every material. Confirm the current method, sample requirements, and accreditation status with the laboratory.

Technical Resources

Analytical Chemistry Standards Reference

Testing requirements vary by material and application. For additional information about published analytical methods, consult ASTM International. Clark Testing can help identify applicable methods for a specific sample and testing objective.

Common Questions

Analytical Chemistry Testing FAQs

What analytical chemistry testing methods does Clark Testing offer?

Clark Testing offers instrumental and laboratory techniques including ICP spectroscopy, OES, WD-XRF, XRD, ion chromatography, elemental analysis, gas chromatography, and wet chemistry. The appropriate method depends on the material, analytes, and reporting requirements.

Can Clark Testing analyze industrial materials and manufacturing by-products?

Yes. Materials described in Clark Testing's analytical chemistry capabilities include metals and alloys, ceramics, refractories, ores, industrial minerals, slag, baghouse dust, process solutions, and petroleum products. Sample preparation varies by material.

Does Clark Testing perform analytical chemistry testing to ASTM standards?

Clark Testing performs applicable analytical chemistry testing using recognized standards and approved methods. Examples referenced on this page include ASTM E415, ASTM E1086, ASTM D6443, and ASTM D2622. Confirm the specific method, revision, and accreditation status when requesting a quote.

How do I choose between ICP, XRF, OES, and XRD testing?

These techniques answer different questions. ICP and OES can measure elemental composition, WD-XRF can support elemental or oxide analysis for appropriate materials, and XRD identifies crystalline phases. The best choice depends on sample type, detection needs, and the information required.

Work with Clark Testing

Discuss Your Analytical Chemistry Testing Requirements

Tell us about your material, the elements or properties of interest, the applicable specification, and your reporting needs. Our team can help determine the appropriate analytical approach.

Our analytical chemistry testing services are built on precision, compliance, and trust—delivering reliable results that drive product quality and innovation.

Matt Carns, General Manager, Clark Laboratories