Request a Quote
Nuclear

From Requirements to Qualification

Nuclear Industry Testing & Qualification

Proven Nuclear Equipment Qualification Expertise

For more than three decades, Clark Testing has supported manufacturers, suppliers, and engineering teams serving the commercial nuclear power industry. Our nuclear equipment qualification experience dates to 1992, when Clark acquired a Westinghouse equipment qualification laboratory.

Today, Clark supports nuclear equipment qualification (EQ), seismic testing, environmental aging, electromagnetic compatibility, mechanical testing, and commercial grade dedication activities. Our services help customers establish and document equipment performance against defined design basis conditions, functional requirements, and acceptance criteria.

From operating plant life extension and replacement equipment to new nuclear construction and small modular reactors (SMRs), we help translate complex technical requirements into practical, documented testing programs.

Nuclear Equipment Qualification Services

Nuclear equipment qualification requires more than performing an individual test. Equipment may need to demonstrate its ability to perform an intended function after exposure to defined operating environments, aging mechanisms, and design basis events.

Clark works with equipment manufacturers, suppliers, system integrators, and nuclear project teams to develop qualification programs based on applicable technical specifications, equipment classification, service conditions, and customer acceptance requirements.

Seismic Equipment Qualification

Dynamic testing to evaluate equipment response to specified seismic loading and demonstrate required functional or structural performance during or following a seismic event.

Programs may include test response spectrum development, mounting and fixture evaluation, resonance investigation, instrumentation, functional monitoring, and qualification reporting.

Explore Seismic Testing

Environmental Aging & Life Cycle Testing

Evaluation of equipment and materials under specified temperature, humidity, thermal cycling, and other environmental conditions.

Where applicable, aging programs help establish the preconditioning and environmental exposure sequence needed before subsequent qualification testing.

Explore Environmental Aging

EMC & EMI Testing

Electromagnetic compatibility testing for electrical, electronic, and control equipment used in nuclear applications.

Testing may address conducted and radiated emissions, susceptibility, and immunity requirements based on the equipment specification and applicable industry guidance.

Explore EMC Testing

Mechanical, Structural & Load Testing

Structural and mechanical testing of equipment assemblies, supports, mounting systems, and components subject to specified operational or design basis loads.

Services may include static loading, proof loading, fatigue evaluation, and structural performance verification.

Explore Mechanical Testing

Vibration & Dynamic Testing

Evaluation of equipment performance under defined vibration environments, including operational vibration, resonance investigation, and specified dynamic loading.

Testing can support qualification, design verification, and investigation of equipment response under representative operating conditions.

Explore Vibration Testing

Functional Testing & Documentation

Functional monitoring before, during, and after applicable test exposures helps determine whether equipment satisfies defined acceptance criteria.

Clark can coordinate test procedures, instrumentation, inspection points, recorded measurements, and final test reports to support the customer's qualification documentation.

Explore Equipment Qualification Services

Qualification Support From Requirements Through Final Report

Successful nuclear equipment qualification begins with a clear understanding of the equipment's safety function, design requirements, installation configuration, service environment, and acceptance criteria.

Clark can support complete qualification programs or individual testing disciplines, helping customers coordinate the technical activities needed to develop an auditable qualification record.

Requirements Review & Test Planning

  • Equipment specifications and intended functions
  • Applicable standards and design basis requirements
  • Environmental and seismic conditions
  • Test sequencing and preconditioning
  • Mounting, fixturing, and instrumentation
  • Functional monitoring and acceptance criteria

Test Execution & Qualification Records

  • Approved test procedures and configurations
  • Inspection and baseline measurements
  • Applicable aging and environmental exposures
  • Seismic, vibration, EMC, and mechanical testing
  • Functional performance documentation
  • Test reports and supporting technical records

Program-specific qualification: The applicable testing sequence and acceptance requirements depend on the component, its classification, intended function, service conditions, and the customer's licensing and procurement requirements. Not every listed test or standard applies to every nuclear component.

Testing for Safety-Related Nuclear Equipment

Safety-related equipment may be required to perform an intended function under normal operating conditions, anticipated operational occurrences, or specified design basis events. Qualification programs establish the technical evidence needed to support those requirements.

Clark's testing services can support qualification and verification activities for a broad range of electrical, mechanical, and instrumentation components, subject to the equipment's specific requirements.

Electrical & Control Equipment

Electrical enclosures, control assemblies, instrumentation, electronic modules, electrical distribution components, and associated equipment requiring environmental, seismic, or electromagnetic performance evaluation.

Mechanical Equipment & Assemblies

Equipment supports, brackets, mechanical assemblies, mounted components, and related hardware requiring structural, vibration, seismic, or functional performance verification.

Replacement & Obsolete Components

Components being evaluated for replacement of discontinued or unavailable equipment, including verification of critical characteristics and performance against established technical requirements.

Supplier & OEM Qualification Programs

Qualification testing for equipment manufacturers and suppliers seeking to demonstrate component performance and provide supporting technical documentation to nuclear customers.

Nuclear Testing Standards & Quality Requirements

Nuclear equipment qualification programs may reference industry standards, regulatory requirements, design specifications, and customer-specific procedures. Clark helps customers identify the applicable testing scope and supporting documentation requirements.

Standard or Requirement Relevance to Nuclear Qualification
IEEE 323 Qualification of Class 1E equipment for nuclear power generating stations, including relevant aging and environmental qualification considerations.
IEEE 344 Seismic qualification of equipment for nuclear power generating stations.
IEEE 382 Qualification of safety-related actuators for nuclear power generating stations.
IEEE 383 Qualification of electric cables and field splices for nuclear power generating stations.
IEEE 603 Safety system criteria relevant to nuclear power generating stations and associated equipment requirements.
Regulatory Guide 1.180 Guidance addressing electromagnetic and radio-frequency interference considerations for safety-related instrumentation and control systems.
10 CFR 50, Appendix B Quality assurance criteria applicable to nuclear power plant and fuel reprocessing plant activities within its regulatory scope.
ASME NQA-1 Quality assurance requirements for nuclear facility applications.
ISO/IEC 17025 Laboratory competence requirements applicable to testing and calibration activities within the laboratory's accredited scope.

Important: Standards are listed to describe relevant nuclear qualification frameworks, not to imply that Clark performs every test described by each standard or holds accreditation for every listed method. Testing availability, quality requirements, and applicable standard editions should be confirmed during project review.

Commercial Grade Dedication & Replacement Equipment Support

Commercial grade dedication can be an important consideration when commercially available components are evaluated for use in safety-related nuclear applications. This is especially relevant when original equipment becomes obsolete, replacement parts are difficult to obtain, or alternate suppliers must be evaluated.

Clark can provide engineering, inspection, testing, and documentation support as part of a customer's dedication process. Activities may include technical evaluations, identification of critical characteristics, verification planning, and physical testing needed to support the dedication basis.

Technical Evaluation & Planning

Support for identifying equipment requirements, intended safety functions, critical characteristics, inspection needs, and appropriate verification methods.

Critical Characteristic Verification

Inspection and testing to help verify specified physical, performance, or functional characteristics under established acceptance criteria.

Replacement Equipment Testing

Mechanical, environmental, seismic, EMC, and functional testing as applicable to the replacement component and its intended service.

Supporting Documentation

Technical records, test results, and inspection documentation to support customer review and dedication activities.

The dedicating entity and licensee retain responsibility for establishing the dedication basis, acceptance criteria, and final acceptance of the item. Clark provides technical services and documentation to support those decisions.

Supporting the Existing Nuclear Fleet, New Builds & SMRs

Nuclear qualification requirements continue to evolve as operators maintain existing facilities, modernize equipment, and develop new reactor technologies. Clark supports the testing needs associated with each stage of that equipment lifecycle.

Operating Plant Life Extension

Qualification and testing support for equipment replacement, modernization, obsolescence management, and long-term plant reliability initiatives.

New Nuclear Construction

Testing programs for manufacturers and suppliers supporting new nuclear projects, with qualification activities developed around project-specific requirements.

Small Modular Reactors

Equipment testing and qualification support for SMR developers, technology providers, and component suppliers working with new reactor designs and equipment configurations.

Equipment Modernization

Verification of replacement components, electrical and control upgrades, mechanical equipment changes, and supplier qualification requirements.

Why Nuclear Suppliers Work With Clark Testing

Nuclear EQ Experience Since 1992

Clark's nuclear qualification capabilities trace back to the acquisition of a Westinghouse equipment qualification laboratory, establishing a long history of serving the nuclear supply chain.

Multidisciplinary Testing

Seismic, environmental, vibration, EMC, structural, and related testing services help customers coordinate multiple qualification activities through one testing organization.

Nuclear Quality Assurance

Clark maintains a nuclear quality assurance program aligned with applicable 10 CFR 50 Appendix B and ASME NQA-1 requirements, with project-specific quality provisions reviewed during planning.

Technical Documentation

Defined procedures, recorded results, functional monitoring, and traceable test documentation help customers assemble the technical records needed for their qualification programs.

Clark also maintains ISO/IEC 17025 laboratory accreditation and CMMC Level 2 certification. These credentials support laboratory competence and information security respectively, but do not replace the nuclear-specific quality and qualification requirements applicable to a given project.

Related Testing & Technical Services

Depending on the component, material, or operating environment, nuclear suppliers may also require supporting laboratory analysis and specialized testing.

Analytical Chemistry

Laboratory analysis to support material evaluation, chemical characterization, and investigation of specified substances or contaminants.

Corrosion Testing

Evaluation of materials and components under specified corrosion exposure conditions.

Industrial Hygiene

Industrial hygiene services supporting occupational exposure assessment and workplace environmental evaluation.

Particle Characterization

Particle and material characterization services for applicable analytical and technical investigations.

Work With Clark Testing

Bring Us Your Nuclear Qualification Requirements

Whether you need a complete equipment qualification program, seismic testing, environmental aging, EMC evaluation, or commercial grade dedication support, Clark Testing can help review the requirements and develop a practical testing approach.

Share your equipment specifications, applicable standards, service environment, acceptance criteria, and project schedule with our team.

In the nuclear sector, failure is not an option. Our testing ensures safety, compliance, and long-term reliability under extreme conditions.

Paul Heffernan, CEO of Clark Testing