Request a Quote
Superior

Testing that Reaches the World

ASTM D664 – Acid Number Testing of Petroleum Products

ASTM D664 Acid Number Testing by Potentiometric Titration

ASTM D664 establishes a standardized laboratory method for determining the acid number of petroleum products, lubricants, biodiesel, and other applicable materials using potentiometric titration.

Acid number testing helps manufacturers, equipment operators, and maintenance teams evaluate acidic constituents in petroleum-based products and monitor changes that may indicate oxidation, degradation, contamination, or other changes in fluid condition.

Clark Testing provides fuel and lubrication testing and analytical chemistry services to support petroleum product evaluation, industrial equipment maintenance, and fluid condition monitoring programs.

What Is ASTM D664?

ASTM D664, Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration, describes a laboratory procedure for determining acidic constituents in petroleum products and lubricants that are soluble or nearly soluble in the specified solvent mixture.

The method uses potentiometric titration to determine the quantity of base required to neutralize acidic constituents under the prescribed test conditions.

Results are reported as an acid number, typically expressed in milligrams of potassium hydroxide per gram of sample (mg KOH/g).

ASTM D664 is frequently used to evaluate:

  • New and in-service lubricating oils
  • Hydraulic fluids
  • Turbine oils
  • Industrial lubricants
  • Petroleum products
  • Biodiesel and biodiesel blends where applicable
  • Other compatible petroleum-derived materials

The test method provides a quantitative acid number result. Interpretation depends on the fluid formulation, operating conditions, historical trends, and applicable product specifications.

How ASTM D664 Acid Number Testing Works

ASTM D664 uses potentiometric titration to measure the acidic constituents of a sample.

During testing, a prepared sample is dissolved in the prescribed solvent system and titrated using a standardized alcoholic potassium hydroxide solution.

An electrode system monitors changes in electrical potential during titration to identify the appropriate endpoint.

Sample Preparation

A representative sample is collected and prepared according to the applicable test method.

Proper sampling and handling help minimize contamination and preserve the condition of the fluid being evaluated.

Potentiometric Titration

The sample is dissolved in the specified solvent mixture and titrated with a standardized base.

The titration instrument measures electrical potential as titrant is added.

Endpoint Determination

The acid number is determined using the endpoint criteria established by the applicable ASTM D664 procedure.

Depending on the sample characteristics, the endpoint may be identified from the titration curve or an appropriate prescribed endpoint method.

Results and Reporting

The result is calculated and reported in mg KOH/g.

Additional information may include the test method designation, sample identification, and relevant observations affecting interpretation.

Understanding Acid Number Results

Acid number represents the amount of potassium hydroxide, expressed in milligrams, required to neutralize acidic constituents in one gram of sample under the test method conditions.

For example, a reported acid number of 1.0 mg KOH/g represents the equivalent of 1.0 milligram of potassium hydroxide per gram of sample.

An elevated or increasing acid number may indicate changes in fluid condition, but the significance depends on the product and its formulation.

Some new lubricants contain acidic additives that contribute to their initial acid number. Therefore, a higher result does not automatically mean that a fluid has degraded.

For condition monitoring, acid number results are often most useful when compared against:

  • New oil baseline values
  • Previous samples from the same equipment
  • Manufacturer recommendations
  • Established maintenance limits
  • Other lubricant condition test results

Applications for ASTM D664 Testing

ASTM D664 acid number testing supports a variety of industrial and petroleum-related applications.

Lubricant Condition Monitoring

Acid number testing can help maintenance teams monitor changes in lubricating oils during service.

Trending results over time may provide information about fluid oxidation, degradation, or changes in chemical composition.

Turbine and Hydraulic Oil Evaluation

Industrial turbine and hydraulic systems rely on fluids that maintain appropriate chemical and physical characteristics.

Acid number testing can form part of a broader oil analysis program for evaluating fluid condition.

Petroleum Product Quality Testing

ASTM D664 may be used to determine acid number as part of petroleum product evaluation and quality assurance programs.

Biodiesel and Fuel Analysis

Acid number measurements may be required for certain fuel specifications, including applicable biodiesel quality requirements.

The appropriate method and acceptance limit depend on the relevant fuel specification.

Industrial Maintenance Programs

Routine acid number testing can support condition-based maintenance strategies when combined with other fluid analysis methods and equipment operating data.

Why Acid Number Testing Matters

Lubricants and petroleum products can undergo chemical changes during storage and operation.

Exposure to heat, oxygen, contaminants, and other operating conditions may contribute to oxidation or the formation of acidic degradation products.

Depending on the fluid and application, these changes may be associated with:

  • Increased fluid oxidation
  • Corrosion-related concerns
  • Deposit and sludge formation
  • Changes in lubricant performance
  • Reduced fluid service life
  • Increased equipment maintenance requirements

Acid number testing helps identify and monitor certain chemical changes, but it should not be used as the sole indicator of fluid condition.

A comprehensive lubricant analysis program may also evaluate viscosity, water content, wear metals, oxidation, particle contamination, and other relevant properties.

ASTM D664 Compared With Other Petroleum Testing Standards

ASTM D664 is one of several analytical methods used to evaluate petroleum products and industrial fluids.

Related methods include:

  • ASTM D974: Acid and base number determination by color-indicator titration.
  • ASTM D2896: Base number determination by potentiometric perchloric acid titration.
  • ASTM D4739: Base number determination by potentiometric hydrochloric acid titration.
  • ASTM D6304: Water determination in petroleum products by coulometric Karl Fischer titration.
  • ASTM D445: Kinematic viscosity of transparent and opaque liquids.
  • ASTM D4377: Water in crude oils by potentiometric Karl Fischer titration.

These methods measure different fluid properties and may be used together in petroleum product evaluation and condition monitoring programs.

ASTM D664 Testing at Clark Testing

Clark Testing provides fuel and lubrication testing and analytical chemistry services for manufacturers, industrial facilities, equipment operators, and petroleum-related customers.

Our laboratory team can review sample characteristics, applicable specifications, reporting requirements, and related analytical testing needs to help determine an appropriate fluid evaluation program.

ASTM D664 acid number testing can support petroleum product quality evaluation, lubricant condition monitoring, and investigations involving changes in fluid chemistry.

Contact Clark Testing to discuss ASTM D664 acid number testing requirements or request a quotation for petroleum product and lubricant analysis services.