Request a Quote
Superior

Testing that Reaches the World

Environmental Simulation & Low-Pressure Testing

Altitude Testing Services

Clark Testing evaluates product performance, durability and functionality in simulated high-altitude, low-pressure environments using an altitude chamber capable of simulating conditions up to 50,000 feet.

Support for aerospace, defense, electronics, packaging and transportation applications, including test programs based on applicable MIL-STD-810, ASTM D6653 and IEC 60068-2-13 requirements.

Laboratory Capabilities

Altitude Chamber Specifications

The chamber simulates low-pressure conditions encountered during air transport and operation at high elevations. The following specifications are reported on Clark Testing's existing altitude service page.

  • Altitude simulation: Sea level to 50,000 feet
  • Temperature control: -30°F to +177°C; reported ±1°C stability
  • Humidity control: 20% to 95% relative humidity
  • Interior dimensions: 72 in. W × 48 in. D × 60 in. H
  • Data acquisition: Real-time pressure, temperature and humidity monitoring and reporting

Why Low Pressure Matters

Evaluate Pressure-Related Product Risks

Reduced atmospheric pressure can affect sealed enclosures, packaging, adhesives, electrical systems and mechanical assemblies. Simulated altitude testing helps identify pressure-related failure modes before products are shipped or deployed.

Depending on the test plan, evaluations may support product validation, failure investigation and documentation of performance under specified low-pressure conditions.

Testing Applications

What Altitude Testing Helps Evaluate

Air Transport & Packaging

Assess package integrity and sealed systems exposed to reduced pressure during air cargo transport.

Electronics & Power Systems

Evaluate circuit boards, sensors, batteries and other assemblies intended to operate or travel at elevation.

Aerospace & Defense Components

Investigate the response of avionics, payload systems and related equipment to specified altitude environments.

Medical Device Packaging

Assess the physical integrity of packaged medical devices during simulated high-altitude transport; sterility assurance requires its own appropriate validation program.

Applicable Test Methods

Altitude Testing Standards

Clark Testing's original altitude page identifies the following standards. The required revision, procedure, test conditions and acceptance criteria should be confirmed for each project.

ASTM D6653

Evaluates effects of high altitude on packaging systems by vacuum method.

IEC 60068-2-13

Environmental testing procedure addressing low air pressure.

Testing to a named method is not the same as a blanket product certification. Confirm the laboratory's current accredited scope for the specific method when accreditation is required.

Coordinated Environmental Programs

Altitude, Temperature & Humidity Considerations

Altitude exposure can be evaluated alongside thermal and humidity requirements where the equipment's intended environment and the selected procedure call for them. Test sequencing and combined conditions should be established in the approved test plan rather than assumed to apply to every product.

For broader environmental qualification, see Environmental Aging & Life Cycle Testing and MIL-STD-810 Environmental Testing.

Planning Your Program

Information Needed for an Altitude Testing Quote

To scope a suitable test program, provide the product's dimensions and weight, required standard and revision, simulated altitude or pressure profile, exposure duration, temperature and humidity requirements, operating configuration, instrumentation needs and pass/fail criteria.

Our team can review these inputs and discuss a test approach aligned with your application and reporting needs.

Frequently Asked Questions

Altitude Testing FAQs

How high can Clark Testing's altitude chamber simulate?

The existing altitude service page lists a simulated altitude range from sea level to 50,000 feet.

What kinds of failures can low-pressure testing reveal?

Depending on the product, testing may reveal packaging deformation, seal problems, expansion effects or changes in electrical and mechanical performance.

Does altitude testing always include temperature and humidity cycling?

No. The exposure profile depends on the applicable method and the customer's requirements. Additional environmental conditions should be specified in the test plan.

Which altitude testing standards are referenced?

Clark Testing's original service description references MIL-STD-810 Method 500.6, ASTM D6653 and IEC 60068-2-13. Confirm the revision required by your program.

What should I provide to request a quote?

Share the equipment dimensions, required test method, altitude profile, duration, operating conditions and acceptance criteria.

Altitude & Low-Pressure Testing

Ready to Evaluate Your Product at Altitude?

Send your specifications and required pressure profile. Clark Testing can discuss chamber fit, test requirements and next steps.

" We work closely with you to validate engineering, ensure quality, analyze products and qualify equipment while supporting the time constraints and product cycles that are vital to your success. "

Paul Heffernan, CEO of Clark Testing