Request a Quote
Superior

Testing that Reaches the World

EN 61000-4-11 – Voltage Dips and Short Interruptions Immunity Testing

EN 61000-4-11 Voltage Dips and Power Interruption Testing Services

EN 61000-4-11 establishes standardized test methods for evaluating the immunity of electrical and electronic equipment to voltage dips, short interruptions, and voltage variations on AC power supply inputs.

These disturbances can occur during normal power distribution events, electrical faults, equipment switching, and other operating conditions. Testing helps manufacturers determine whether their equipment maintains acceptable performance when the supply voltage temporarily decreases or is interrupted.

Clark Testing provides electromagnetic compatibility (EMC) testing and equipment qualification services to support manufacturers evaluating electrical immunity, product reliability, and compliance with applicable industry requirements.

What Is EN 61000-4-11?

EN 61000-4-11 is the European adoption of IEC 61000-4-11, Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase.

The standard defines laboratory procedures for applying controlled disturbances to AC-powered electrical and electronic equipment.

These disturbances include:

  • Voltage dips: Temporary reductions in the RMS supply voltage.
  • Short interruptions: Temporary loss or near-total loss of the supply voltage.
  • Voltage variations: Controlled changes in supply voltage used to evaluate equipment response under specified conditions.

EN 61000-4-11 provides a basic EMC immunity test method. The applicable product standard or customer specification establishes the required test levels, durations, and performance acceptance criteria.

EN 61000-4-11 Test Methods

Testing uses a voltage dip and interruption generator capable of producing specified changes in the AC supply voltage.

Voltage Dip Testing

Voltage dip testing evaluates equipment response when the supply voltage temporarily falls below its nominal value.

Depending on the applicable specification, tests may involve residual voltage levels such as:

  • 0% of nominal voltage
  • 40% of nominal voltage
  • 70% of nominal voltage
  • 80% of nominal voltage

The disturbance duration is specified in cycles or milliseconds, depending on the test requirements.

Short Interruption Testing

Short interruption testing evaluates equipment performance when the AC supply is temporarily removed or reduced to a very low residual voltage.

The equipment may be monitored for unexpected resets, loss of functionality, communication interruptions, or other changes in performance.

Voltage Variation Testing

Voltage variation testing evaluates equipment response to specified changes in supply voltage.

The applicable procedure may include controlled transitions between voltage levels and defined exposure durations.

EN 61000-4-11 Testing Procedure

A typical immunity evaluation includes:

  • Test planning: Identifying the applicable standard edition, equipment operating conditions, supply characteristics, and performance requirements.
  • Equipment configuration: Connecting the equipment under test to the appropriate disturbance generator.
  • Baseline verification: Confirming normal equipment operation before applying disturbances.
  • Voltage dip testing: Applying the specified residual voltage levels and durations.
  • Short interruption testing: Introducing temporary supply interruptions according to the applicable procedure.
  • Voltage variation testing: Applying specified supply voltage changes where required.
  • Functional monitoring: Observing equipment behavior during and after each disturbance.
  • Results documentation: Recording the applied conditions, equipment responses, recovery behavior, and test results.

Testing provides information about equipment immunity to power supply disturbances under controlled laboratory conditions.

Applications for EN 61000-4-11 Testing

Voltage dip and interruption immunity testing may support manufacturers of:

  • Industrial automation and control systems
  • Electronic power supplies and control modules
  • Programmable logic controllers
  • Communication and networking equipment
  • Electronic measurement and monitoring devices
  • Rail and transit electronic equipment
  • Commercial and industrial electronic products
  • Electrical equipment with AC power supply inputs

Testing may support product development, design verification, troubleshooting, and regulatory or customer-specific qualification programs.

Why Voltage Dip and Interruption Testing Matters

Electrical equipment can experience temporary power disturbances during normal operation.

These disturbances may result from electrical faults, switching events, changes in electrical loading, or interruptions within the power distribution system.

Depending on the equipment design, temporary reductions in supply voltage may cause:

  • Unexpected equipment resets
  • Communication interruptions
  • Control system malfunctions
  • Loss of stored or operating data
  • Temporary shutdowns
  • Failure to recover automatically
  • Changes in output or operating performance

Laboratory testing helps manufacturers evaluate equipment behavior and identify opportunities to improve power supply design, energy storage, control logic, and recovery performance.

EN 61000-4-11 and Related EMC Standards

EN 61000-4-11 addresses voltage dips, short interruptions, and voltage variations for equipment within its specified AC input current range.

Related standards include:

  • EN 61000-4-2: Electrostatic discharge immunity.
  • EN 61000-4-3: Radiated RF electromagnetic field immunity.
  • EN 61000-4-4: Electrical fast transient/burst immunity.
  • EN 61000-4-5: Surge immunity.
  • EN 61000-4-6: Conducted RF immunity.
  • EN 61000-4-29: Voltage dips, short interruptions, and voltage variations on DC input power ports.

For AC-powered equipment drawing more than 16 A per phase, IEC 61000-4-34 addresses corresponding immunity testing requirements.

Manufacturers should select the appropriate standard based on equipment power characteristics and applicable product requirements.

EN 61000-4-11 Testing at Clark Testing

Clark Testing supports manufacturers with electromagnetic compatibility testing, electrical immunity evaluation, and equipment qualification services.

Our EMC testing team can review equipment power requirements, operating configurations, applicable test levels, disturbance durations, and performance criteria to help determine an appropriate voltage dip and interruption testing program.

Whether evaluating a new electronic product or investigating susceptibility to power supply disturbances, Clark Testing can assist with laboratory testing, test planning, and technical documentation.

Contact Clark Testing to discuss EN 61000-4-11 voltage dip and interruption immunity testing requirements or request a quotation for EMC testing services.