Testing that Reaches the World
Fuels & Lubricants Laboratory
Diesel Fuel Testing Services
Clark Testing provides laboratory diesel fuel testing for fuel quality, contamination, performance, and storage stability. Our services support emergency and standby generators, fleet operations, fuel distributors, industrial equipment, and other diesel-powered systems.
From ASTM D975 specification evaluations to water, sediment, cetane, sulfur, lubricity, and microbial contamination analysis, our team helps customers understand fuel condition and make informed maintenance and purchasing decisions. We also offer Diesel Quality Monitoring Services (DQMS) for recurring assessment and historical trending.
Laboratory Capabilities
Diesel Fuel Testing Capabilities
Clark Testing evaluates diesel fuel properties that affect specification compliance, combustion, equipment protection, and reliability during long-term storage.
Fuel Quality & Specification
- ASTM D975 diesel fuel specification testing and ULSD evaluations
- Cetane number and calculated cetane index
- Flash point, distillation, viscosity, density, and API gravity
- Cloud point, pour point, color, and appearance or haze
- Sulfur content, conductivity, and copper strip corrosion
- Biodiesel content and blending-related evaluations
Contamination, Condition & Performance
- Water and sediment, particulate contamination, and metals
- Microbial contamination screening for stored diesel
- Fuel lubricity by HFRR or BOCLE, as applicable
- Heating value / energy content
- Fuel stability and additive or treatment evaluations
- Recurring diesel quality monitoring and trend reporting
Related services: Explore Fuel & Lubrication Testing, Emergency Generator Fuel Testing, and Analytical Chemistry. Available tests, sampling plans, and accreditation scope should be confirmed when quoting.
Specification & Fuel Properties
Diesel Fuel Quality and ASTM D975 Testing
ASTM D975 and ULSD Fuel Evaluation
ASTM D975 establishes requirements for diesel fuel oils, including grades used in a wide range of compression-ignition engines. The appropriate test slate depends on the fuel grade, intended use, and customer specification. Testing can include flash point, viscosity, sulfur, distillation, cetane-related properties, water and sediment, and other relevant characteristics.
Ignition, Flow and Low-Temperature Behavior
Cetane number assesses ignition quality; cetane index is a calculated estimate derived from measured fuel properties and is not interchangeable with a direct cetane-number determination. Viscosity, density, cloud point, and pour point provide different information about fuel handling, atomization, and cold-weather suitability.
Lubricity, Energy Content and Biodiesel
Lubricity testing helps evaluate fuel-related wear protection in injection systems. Heating value characterizes available energy per unit mass or volume, depending on the method. Biodiesel blends can require additional evaluation for composition, cold-flow behavior, oxidation stability, and compatibility with equipment requirements.
Fuel Storage & Reliability
Diesel Fuel Contamination and Long-Term Storage
Water, Sediment and Particulate Contamination
Stored fuel may accumulate water through condensation, ingress, or handling. Water can promote corrosion and microbial growth, while sediment and particulate matter can contribute to filter restriction and equipment problems. Laboratory analysis helps characterize contamination and establish a baseline for corrective action.
Microbial Activity and Fuel Degradation
Microorganisms can proliferate at fuel-water interfaces when conditions permit. Testing can help identify potential microbial contamination. Oxidation and aging can also change fuel stability and contribute to deposits or other operational concerns. Results should be interpreted alongside tank conditions and maintenance history.
Additives, Treatments and Retesting
Fuel treatment programs should be evaluated against a defined problem and appropriate test methods. A post-treatment sample can help assess whether relevant fuel properties have improved; laboratory results alone do not guarantee removal of all contamination from a tank or distribution system.
Critical Infrastructure
Emergency Generator Diesel Fuel Testing
Standby generators may sit idle for extended periods yet need to start and carry load during an outage. Fuel sampling and periodic laboratory analysis can help facility managers detect changes before an emergency. Applications include healthcare facilities, data centers, industrial plants, and other critical-power installations.
Our Emergency Generator Fuel Testing service addresses stored fuel condition. Test selection should reflect equipment manufacturer guidance, fuel age, storage conditions, and facility maintenance requirements. NFPA 110 may be relevant to emergency and standby power systems, but the facility must determine its applicable compliance obligations.
Ongoing Programs
Diesel Quality Monitoring Services (DQMS)
Clark Testing offers Diesel Quality Monitoring Services (DQMS) for organizations that need recurring fuel assessment rather than a one-time snapshot. A monitoring plan can establish a starting baseline, define appropriate sampling intervals, and track changes in properties such as water, sediment, microbial condition, stability, and other application-specific indicators.
Historical trending can support decisions about filtration, tank cleaning, fuel polishing, treatment, replacement, or further investigation. Sampling locations, frequency, acceptance limits, and corrective actions should be established for the individual site.
Method Selection
Diesel Fuel Testing Standards and Applications
The following are representative industry methods for diesel fuel evaluation, not a guarantee that every method is performed at every Clark Testing location or covered by accreditation. Confirm the current method revision, requested test slate, sample volume, and laboratory scope before ordering.
| Method | Evaluation | Typical application |
|---|---|---|
| ASTM D975 | Diesel fuel oil specification | Diesel grade and property requirements |
| ASTM D613 | Cetane number by engine method | Ignition quality |
| ASTM D976 / D4737 | Calculated cetane index | Estimated ignition quality from measured properties |
| ASTM D93 | Flash point by Pensky-Martens closed cup | Handling and fuel specification |
| ASTM D445 | Kinematic viscosity | Fuel flow characteristics |
| ASTM D86 | Distillation characteristics | Volatility and fuel specification |
| ASTM D5453 | Sulfur by ultraviolet fluorescence | Sulfur content / ULSD assessment |
| ASTM D6304 | Water by Karl Fischer titration | Moisture content |
| ASTM D2709 | Water and sediment by centrifuge | Contamination assessment |
| ASTM D6079 | HFRR lubricity | Fuel lubricity |
| ASTM D2500 / D97 | Cloud point / pour point | Low-temperature fuel behavior |
| ASTM D130 | Copper strip corrosion | Corrosivity toward copper |
Sampling & Reporting
Planning a Diesel Fuel Testing Program
For an accurate quote, provide the fuel type and grade, equipment application, tank or batch size, sample source, time in storage, known concerns, required standards, and whether the request is a baseline, investigation, or ongoing monitoring program.
Sample collection and container selection matter. A tank-bottom sample may answer different questions than a representative bulk-fuel sample. Coordinate the sampling plan with our team so results address the actual operating concern. For related diagnostics, see Condition Monitoring and Analytical Chemistry Testing.
Technical Reference
Diesel Fuel Standards Resources
ASTM International publishes the ASTM D975 specification and associated fuel test methods. Test-method results should be evaluated against the applicable fuel grade, engine manufacturer requirements, purchasing specification, or site maintenance criteria.
Common Questions
Diesel Fuel Testing FAQs
What does a diesel fuel test include?
The test slate depends on the fuel and purpose. Common parameters include water and sediment, sulfur, flash point, viscosity, cetane-related properties, lubricity, microbial contamination, and fuel stability. A complete ASTM D975 evaluation is different from a targeted storage-condition screen.
How often should emergency generator diesel fuel be tested?
Frequency depends on the applicable facility standard, generator manufacturer recommendations, fuel storage history, and site risk. A recurring monitoring program can help establish trends; confirm any required testing schedule with the authority or standard governing your facility.
Can laboratory testing tell whether old diesel fuel is still usable?
Testing can identify measured properties and contaminants, but suitability depends on the equipment and applicable acceptance criteria. Age alone is not a complete indicator, and a passing result does not eliminate all operational risks.
What is the difference between cetane number and cetane index?
Cetane number is measured using a prescribed ignition-quality method. Cetane index is calculated from fuel properties and is an estimate; the two are not interchangeable for every specification or fuel blend.
Does Clark Testing offer ongoing diesel fuel monitoring?
Yes. Clark Testing describes Diesel Quality Monitoring Services (DQMS) for recurring evaluation and historical trending. Contact the laboratory to define the test panel, sampling approach, and reporting cadence.
Work with Clark Testing
Discuss Your Diesel Fuel Testing Requirements
Whether you need ASTM D975 testing, contamination analysis, emergency generator fuel monitoring, or a recurring DQMS program, our team can help define a testing approach for your fuel and application.